Installation of central vacuum systems
A central vacuum system is usually easy to install. In an existing home, tubing can be run through the attic or basement and is then dropped behind interior walls to complete the installation.
Central Vacuums outlets
Two hose lengths is the maximum distance that should separate two inlet valves unless you require additional length to reach the top of drapes or ledges. The first inlet valve should be located the farthest from the power unit. From this location, additional valve locations can be selected that will allow the central vacuum to reach all rooms with a standard 30-ft. hose.
Inlet valves for Central Vacuums
Typically, one inlet valve should be installed for every 700 to 800 square feet of a home. The number of stories, your household cleaning needs and convenience determinations may impact where the inlet valves are strategically placed in your home.
Other things to consider when purchasing Central Vacuum Systems:
Bag or Bag less Central Vacuum System
It is really a matter of convenience. Both central vacuum types are efficient. If you do not mind dumping and cleaning the dirt canister, then consider the bag less. If you would rather toss out the full bag and replace it, then the bags are for you.
Central Vacuums Bag changing
How often the central vacuum system bag needs to be changed is dependent upon use. Normally, bags need to be replaced one to every four months.
The Difference between a crushproof and wire-reinforced hose for a Central Vacuum System
The "wire-reinforced" hose has a rigid wire coiling through the hose to keep it from collapsing. If it were to get compressed, it would not recover and would remain compressed. The "crushproof" hose has no rigid wire and is lighter and more flexible. If it were to get compressed, it would recover to its original shape.
Central Vacuums Buying and User tips
Remember, walls and furniture can shorten the distance serviced by a valve in some areas, so be sure to locate inlets with furniture and walls in mind.
The best central vacuum you should look at should also have the best warranty.
To compare CFM (cubic feet per minute) and water lift does you no good if you do not understand how it is tested. Given every thing being tested equal with the same standard is the only way you can get true comparison. For example, what would you purchase if the CFM on a system was 120, the water lift was 120 and the CFM for another was 100 with the water lift being 80. Remember, every thing has to be equal, so the first system should be your choice as long as it had a better warranty and tools as well.
|
